Home > News > How to solve the problem of unstable speed in motorcycle driving
How to solve the problem of unstable speed in motorcycle driving
Date: 2021.09.09 Viewed:

The idling speed of a motorcycle is not stable, the speed is unstable even while driving, and you can not feel the smooth feeling as if you applied the brakes while driving. In addition to poor acceleration, unstable idling, and still has too fast idling speed, I can't slow down the idling speed after returning the throttle. How can I solve this? Do I need to make a motorcycle throttle cable adjustment?Next, as an example of the analysis, we will take three different brands of motorcycles.

1. Take Honda motorcycle as an example

If Honda's motorcycle speed is unstable, first analyze and resolve the failure. The idling of the engine is unstable, and the engine stalls during operation, making it difficult to start. The engine format for this model is a 4-stroke, air-cooled, single-cylinder engine. It may not be the cause of the motorcycle throttle cable. Reasons for unstable idle speed include the following:

(1) Ignition is not timing. If the ignition is too early, the negative compression work will increase and the engine will not be able to run at low speed.

(2) The flammable mixture is too dilute or too rich. If the flammable mixture is too lean, it will be difficult to start the engine, the carburetor will flash back, the idle speed will be unstable, the power will be reduced and the engine will be unstable. If the flammable mixture is too rich, the engine will overheat, the output will be insufficient, the exhaust pipe will ignite, the acceleration speed will slow down, and the idling speed will become unstable. Therefore, if the flammable mixture is too rich or too dilute, the engine idling will be unstable.

(3) The contact gap of the breaker is inappropriate. If the gap is too small, the resistance at low speeds will be relatively low, the sparks generated will be weakened or intermittent, the low voltage current will not be cut off normally, and the strength of the high voltage sparks will be affected. It misfires at low speeds and makes the engine idling unstable.

(4) If the electrode gap of the spark plug is too small, the idling of the engine will become unstable.

Throttle Cable for HONDA CB 500 F ABS WHITE 2013 CB500FAD

2. Take Yamaha as an example

Clean and adjust the carburetor to see if the mixing ratio is correct. If it is not, we need to adjust the carburetor mixing ratio again. Check whether the idle speed measuring hole is blocked, how the spark plug is, whether it is concentrated, whether the electrode gap is normal, whether the valve gap is too small, if the motorcycle throttle cable need to adjust,etc.

Another possibility is that when we are driving, we accelerate too fast in an instant, resulting in insufficient fuel supply and insufficient power. After switching from a low gear to a high gear, if there is not enough power, it will cause the internal gear of the engine to rotate at an abnormal speed and generate vibrations. The sound of the chain about to be torn off, in fact, there is no problem with the body condition. As long as the accelerator is not raised too quickly when accelerating next time, the buffer acceleration can not only solve this problem, but also help the maintenance of the engine.

Throttle Cable for Yamaha CYGNUS 125

3. Take Haojue and Suzuki motorcycles as an example

There are many reasons why engine idling may be unstable,such as fuel supply, ignition,motorcycle throttle cables,and cylinder sealing.The main reason is that the gas mixture in the cylinder may not ignite when the engine is running. Caused by misfire,increase / decrease in engine speed, unstable idling speed, etc.

Don't forget to check the connecting wire of the temperature sensor. It turns out that one of the two wires is out of place. It may be unplugged, bumped or shaken while driving. This also causes the temperature sensor. Bad contact. The failure is resolved by handling the re-installation of the plug, clearing the failure code, and then performing a load test.

Huafeng is a leading motorycycle control cables supplier in China, offering motorcycle transmission cables and motorcycle throttle cables suitable for different brands and models,convenient for replacement and selection.


Recommended reading:

How to adjust the motorcycle throttle cable?

What should I do if the motorcycle throttle cable is broken?

The working principle of the bicycle brake cable