Introduction to the knowledge of motorcycle voltage stabilizer rectifier

Date: 2021.10.15 Viewed:

What are the precautions for the operation of motorcycle regulator rectifier? Gear shift cable manufacturer—Huafeng introduces to you, the identification of the terminal properties of the motorcycle stabilized rectifier connection line, we can use the half-wave stabilized rectifier interface to be divided into two types: square interface and flat interface.

The plastic package side of the half-wave stabilized rectifier with square interface is facing down, and the end of the connecting wire is facing you. The position of each connection line is the positive pole of the upper left corner and the lower left corner. It is the charging terminal, the upper right is the lighting connection terminal, and the lower right is the ground terminal.

Place the plastic package of the flat interface half-wave regulated rectifier facing down, and the end of the connecting wire facing you. The positions of each connecting wire from left to right are the lighting terminal, the ground terminal and the charging terminal. Terminal and positive terminal,like car shifter cable.

Bike shift cable,The full-wave stabilized rectifier harness connector has 4-wire and 5-wire systems. The 4-wire full-wave stabilized rectifier harness connector is locked upward, and the end of the connecting wire faces you. The connecting wires are the positive pole in the upper left corner, the charging terminal in the lower left corner, the charging terminal in the upper right corner, and the ground terminal in the lower right corner.

5-wire full-wave stable rectifier harness with the connector latch facing upwards and the end of the connecting wire facing you. The upper left corner of each connecting line is positive, and the lower left corner is positive. The ground terminal, the lower right corner is the charging terminal, and the upper middle is the voltage sampling terminal.

Harness connectors for three-phase full-wave regulated rectifiers are available in 5-wire and 6-wire systems.

The 5-wire full-wave regulated rectifier harness connector is divided into two groups, one group has three charging terminals, and the other group has positive and negative terminals.

The 6-wire full-wave rectification and rectification harness connectors are divided into two groups, one group has three charging terminals, the other group has positive and negative terminals and voltage sampling terminals. Confirmation is easy.

If you do not have the original genuine accessories, you can relocate each wire end of the harness connector to eliminate any interference to the charging system.

Gear shift cable manufacturer-Huafeng is your worthy gear shift cable manufacturer. The shift cable control cables we manufacture include car shifter cable, bike shift cable and gear shift cable. Buying gear shift cable, Huafeng is your safe choice.

We take your privacy very seriously