Home > News > How to change manual transmission
How to change manual transmission
Date: 2022.09.23 Viewed:

If the clutch cable is broken or the clutch booster pump is damaged, the clutch does not work, can the car start? For older drivers, it's not that difficult. Shifting gears without pressing the clutch is a must-have skill for almost every veteran driver.

cable

Manual shifting is actually the alternating meshing of the internal gear pairs, and the condition for gear meshing is that the gears rotate at the same speed. In theory, after the car is started, by controlling the engine speed and speed, the two gears to be linked can be synchronized, and the clutch just makes this process more convenient and fast. In the absence of a clutch, we need to know the correspondence between engine speed and vehicle speed. According to this principle, clutchless shifting can be achieved.

The main difficulty with clutchless shifting is getting off the ground. Because the engine is running at this time, the car does not move, and the gears inside the gearbox cannot be synchronized. In this case, it is generally necessary to turn off the car, then shift to the lowest gear, and then start the engine, so that the car can be started under the drive of the starter (the starter on the car has this ability). At this time, as long as we keep up with the accelerator in time, the car can start smoothly.

When driving normally, it is much easier to shift gears without depressing the clutch. As long as you know the approximate correspondence between vehicle speed and engine speed, you can shift gears at the appropriate vehicle speed and speed. For example, after automatic start, when we refuel, the engine speed reaches 2000 rpm and the vehicle speed reaches 12 km/h. At this time, we take off the next gear at the moment of closing the accelerator, and then quickly push the shift lever when the engine speed drops to about 1200 rpm to the second gear. There may be a slight toothache, but fear not. If you keep doing this, the transmission will shift to second gear. In the same way, as long as we change the corresponding gear at the appropriate speed and speed, the car can drive normally. If there is a red light or traffic jam, we need to shut down the engine and restart it without the clutch.

cable

In this process, the shift must be fast. Because theoretically there is only one chance for the gears to sync up when shifting; if lost, it needs to be readjusted. In addition, be sure to pay attention to safety, keep a distance from the front and rear cars, and leave enough safety space. If you're not sure, honestly call for help!

Huafeng is a professional Civic brake cable supplier in China. We manufacture various types of universal brake cables, parking brake cables and automotive control cables. If you are interested, you can contact us and we can send you samples!