The clutch plays a very important role in a manual transmission car, so how to adjust the clutch cable?
1. In the clutch control part, tighten or loosen the clutch wire screw. Tightening means raising it, and loosening it means lowering it.
2. For the hydraulic type, it is necessary to find the adjustable screw on the clutch pedal, which is to adjust on the main cylinder strut. To increase it is to rotate clockwise, and to decrease it is the opposite direction.
3. There are two bolts on the clutch cable, which can also be adjusted by loosening the fixing bolts and adjusting the screws to the correct position.
The performance of clutch disc wear
1. The power is reduced. For models with manual transmission, if the clutch plate is worn, the friction force of the clutch plate will be insufficient, which will also affect the power of the car and reduce the power.
2. It is easy to produce peculiar smell during rapid acceleration. After the clutch plate is damaged, the friction force is reduced, and it is easy to slip with the friction disc, and it is easy to produce a burnt smell during rapid acceleration.
3. The height of the clutch joint point is increased. After the clutch plate is worn, the clutch work is increased, and when the clutch is used, it needs to be lifted higher to be effective.
The symptoms of a broken clutch cable are: the clutch fails, and it is difficult to shift, start, and shift. The working principle of the clutch is as follows: 1. When the inner race is fixed, the outer race rotates the wedge block clockwise without locking, and the outer race can rotate freely; 2. When the outer race rotates the wedge counterclockwise to lock, the outer race The seat ring cannot turn. The main functions of the clutch are: 1. Increase the driving force of the car gradually, so that the car can start smoothly; 2. Shift the gear after the engine and the gearbox are temporarily separated; 3. Prevent the transmission system from overloading; Torsional shock to extend the life of the transmission gear. Serious effects of clutch wear: 1. The car slips and the power is insufficient; 2. The car cannot be started, and it is difficult to ignite; 3. The climbing performance is low and the fuel consumption increases.
Huafeng is a professional brake cable supplier in China. We produce universal brake cable, parking brake cable and automobile control cables for various models. If you are interested, you can contact us and we can send you samples!